Some physıcal and mechanıcal propertıes of the hot pressed eastern beech (fagus orıentalıs lıpsky) wood

dc.authorid0000-0003-1973-4736
dc.contributor.authorÇağatay, Kubulay
dc.date.accessioned2025-04-16T21:39:37Z
dc.date.available2025-04-16T21:39:37Z
dc.date.issued2018
dc.departmentFakülteler, Güzel Sanatlar ve Tasarım Fakültesi, İç Mimarlık ve Çevre Tasarımı
dc.description.abstractThe aim of this study is to determine some physical and mechanical properties of the staypack material obtained from the hot pressed eastern beech (Fagus orientalis Lipsky) wood that arranged with tangent to annual rings and 45 degrees angle to annual rings. For this purpose, test samples were prepared from the eastern beech wood, which was used in an old furniture. Half of the prepared samples were pressed in the hot press at 150 ° C and 100 bar pressure for 45 minutes. Air dry moisture, air dry and oven dry densities, the compression set ratio, the compression set recovery ratio, the bending strength and the modulus of elasticity, the compression strength values of the prepared samples were determined. As a result, the compression strength, modulus of elasticity and tensile strength values of pressed with tangent to annual rings of samples were found to be higher than control samples and pressed with 45 degrees angle to annual rings of samples
dc.identifier.endpage123
dc.identifier.startpage123
dc.identifier.urihttps://hdl.handle.net/20.500.14440/1110
dc.institutionauthorÇağatay, Kubulay
dc.language.isotr
dc.publisherInternational Forest Products Congress
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_Kurum_20250417
dc.subjectStaypack
dc.subjectBeech wood
dc.subjectPhysical properties
dc.subjectmechanical properties.
dc.subjectMechanical properties.
dc.titleSome physıcal and mechanıcal propertıes of the hot pressed eastern beech (fagus orıentalıs lıpsky) wood
dc.typeArticle

Dosyalar