Yazar "Kilinc, Nazire Nurdan Cakir" seçeneğine göre listele

Listeleniyor 1 - 4 / 4
  • [ X ]
    Öğe
    Do mouthwashes affect the optical properties of resin cement?
    (BMC, 2024) Kilinc, Nazire Nurdan Cakir; Yıldız, Pınar
    ObjectivesThe objective of this study was to evaluate the effect of mouthwashes on the optical properties of resin cement.Materials and methodsOne hundred and 60 resin cement discs (6x2mm) were produced from 4 different brands of resin cement (Panavia V5, Estecem II, RelyX Veneer, NX3) with the help of a Teflon mould. The discs were divided into 4 subgroups, 1 of which served as the control group, to be immersed in mouthwashes after measuring the initial L, a, and b values on white and black backgrounds. Colour measurements were repeated after the 1st and 7th days. The collected data were used to calculate the increment E00 value to measure colour stability, the translucency parameter (TP00), and the contrast ratio parameter (CR) to compare translucency change. Data were statistically analysed using mixed-design analysis of ANOVA and the Bonferroni-Dunn test. Repeated measures ANOVA was used for dependent results (alpha = 0.05).ResultsOn the increment E00, TP00, and CR parameters; the joint effect of resin groups, mouthwash groups, and measurement times were found to be statistically significant. The increment E00 (colour difference) parameter; the joint effect of resin groups, mouthwash groups, and measurement times was found to be statistically significant. The TP00; the joint effect of resin groups, mouthwash groups, and measurement times were found to be statistically significant. The CR parameter; the joint effect of resin groups, mouthwash groups, and measurement times was found to be statistically significant. In the Estecem II (Tokuyama) group, the means of Listerine Cool Mint (Johnson & Johnson) was above acceptable limits in both time periods. In the Panavia V5 (Kuraray Noritake) group, the color change was above acceptable limits in all time periods and in all mouthwash groups. Among the resin materials used, Estecem II (Tokuyama) shows the most color change. Listerine Cool Mint (Johnson & Johnson) caused more color change than other mouthwashes at all times.ConclusionsWithin the limitations of this study; the colour stability and translucency value of resin cement depend on both the resin cement content and the mouthwash. Long-term use of mouthwash may adversely affect the optical properties of the resin cement.Clinical relevanceClinicians should take into account the fact that mouthwash use and the composition of the resin cement employed will have an impact on the colour of laminate veneers.
  • [ X ]
    Öğe
    Effect of Various Surface Treatments Applied on Glass Fiber Post and Universal Adhesives on Microtensile Bond Strength and Investigation of Surface Properties with EDX
    (Korean Fiber Soc, 2023) Ekrikaya, Semiha; Demirbuğa, Sezer; Kilinc, Nazire Nurdan Cakir; Avci, Burhanettin
    The purpose of this study is to investigate the effects of various surface treatments and universal adhesives on the changes in the glass fiber posts (GFPs) surface and the bond strength between resin cement-post and core composite-post. A total of 20 groups (n = 16) were formed, 10 groups for resin cement and 10 groups for core composite. Various surface treatments, including acid etching and silane application, and two different universal adhesives (Single bond Universal, All Bond Universal) were applied. After various surface treatments and adhesives were applied to the GFPs surface, the surface properties were examined by energy-dispersive X-ray spectroscopy (EDX) analysis. Standard silicone molds were prepared to bond the resin cement and core composite with the GFPs. The serial 1 mm thickness bar was taken from each sample. Microtensile bond strength (& mu;TBS) test was performed and failure modes were evaluated by scanning electron microscopy (SEM). Statistical analysis was performed using a two-way analysis of variance and Tukey's post hoc tests (p = 0.05). The bond strength values of the groups that applied 37% orthophosphoric acid (OPA), silane, and universal adhesive to the GFPs surface before the resin cement and core composite were statistically significantly higher than the control group (p < 0.05). In the resin cement study, the group using silane and Single Bond Universal showed higher bond strength than the other groups (p < 0.05). Acid etching and silane application before the use of universal adhesives increased the & mu;TBS in both resin cement and core composite groups.
  • [ X ]
    Öğe
    Impact of acid and laser etching of enamel on microleakage in different adhesive systems
    (Springer London Ltd, 2024) Yavuz, Sevim Atilan; Avunduk, Ayse Tugba Erturk; Karataş, Özcan; Kilinc, Nazire Nurdan Cakir; Delikan, Ebru
    This study aimed to evaluate the microleakage of light-cured and self-cured adhesives on enamel surfaces selectively etched with Er, Cr: YSGG laser or 35% phosphoric acid. A total of 60 class V cavities were prepared 1 mm above the cemento-enamel junction (CEJ). The specimens were randomly divided into six groups. Group 1: Clearfil SE Bond with no conditioning, Group 2: Tokuyama Universal Bond with no conditioning, Group 3: Clearfil SE Bond conditioned with 35% phosphoric acid, Group 4: Tokuyama Universal Bond conditioned with 35% phosphoric acid, Group 5: Clearfil SE Bond conditioned with Er, Cr: YSGG laser and Group 6: Tokuyama Universal Bond conditioned with Er, Cr: YSGG laser. Microleakage was evaluated qualitatively (visually) and quantitatively (ImageJ). The data were analyzed using IBM SPSS V23 and submitted to Kruskal-Wallis and Wilcoxon tests. The significance level was set at p < 0.05. In all evaluation methods, the microleakage scores exhibit significant differences (p*<0.001). Group 1 and Group 3 exhibited similar and lower microleakage values than the Group 5. In the occlusal margin, the microleakage values were similar in Group 2, Group 4, and Group 6, whereas in the gingival margin Group 4 showed significantly lower leakage compared to Group 2. Regardless of the etching protocols and adhesive systems used, less microleakage was observed on the occlusal surface than on the gingival surface. Phosphoric acid etching provides better results than laser etching for enamel surface treatment on both occlusal and gingival surfaces.
  • [ X ]
    Öğe
    The influence of different placement techniques on the clinical success of bulk-fill resin composites placed in Class II cavities: a 4-year randomized controlled clinical study
    (Springer Heidelberg, 2023) Kilinc, Nazire Nurdan Cakir; Demirbuğa, Sezer
    Objective The purpose of this double-blind and split-mouth randomized controlled clinical trial was to evaluate the clinical success of the placement technique (bulk-filling and incremental techniques) of a bulk-fill resin composite in Class II carious lesions. Materials and methods Two different bulk-fill resin composites, X-tra fil (Voco) and Filtek Bulk Fill (3M ESPE), were used in the bulk-filling and incremental techniques for 20 patients. The study was carried out in 4 groups, with 20 restorations in each group. Restorations were appraised at baseline, 6-month, 2-year, and 4-year recall. World Dental Federation (FDI) and the US Public Health Service (USPHS) criteria were used in the evaluations. The Friedman, Kruskal-Wallis, and Mann-Whitney U tests were used for the statistical analysis. Results At the end of year 4, there was no loss of restoration in any group. According to the USPHS and FDI criteria, there was a difference in the baseline and 4-year in marginal adaptation and marginal discoloration of the restorations (P < 0.05). When Filtek-Bulk was placed as an incremental technique, there was a minor fracture in four restorations (P > 0.05). In addition, Filtek-Bulk showed a color change according to the results based on both the USPHS and FDI criteria (P < 0.05). The difference between the two placement techniques of each resin composite was not significant at the year 4 recall when all criteria were evaluated (P (>) 0.05). Conclusions The 4-year clinical success of the evaluated bulk-fill composites is not dependent on the placement technique used.